1. Home
  2. Paints
  3. Wall Putty

Wall Putty

Tigonis Wall putty is a white cement-based powder finished coating applied on walls, surfaces, and ceilings.

SKU: WP Category:
  1. General Details

    Tigonis Wall putty is a white cement-based powder finished coating applied on walls, surfaces, and ceilings. This covers unevenness, undulations and pinholes on the plastered surface. It strengthens the wall and protects expensive paints from dampness, efflorescence, and moisture. Tigonis Wall Putty is modified with polymers and special additives for enhanced strength, finish, and performance. Tigonis delivers the real essence of ultrafine decor—always. Tigonis is one of the leading Wall Putty suppliers in Kolkata, Asansol, Bokaro, Siliguri, Bhubaneswar.

  2. Description
    TIGONIS WALL PUTTY

    Tigonis premium Wall putty is a white cement based powder finished coating, applied on walls, surfaces and ceilings. This covers unevenness, undulations and pin holes on the plastered surface. It strengthens the wall and protects expensive paints from dampness, efflorescence and moisture. Tigonis Wall Putty is modified with polymers and special additives for enhanced strength, finish and performance. Tigonis delivers the real essence of ultrafine decor—always.

  3. ADVANTAGES

    ► White smooth surface finish
    ► Considerable reduction of paint consumption
    ► Superior paint finish
    ► Protection from flaking, dampening and peeling off

  4. MIXING

    ► Mix 1kg of Tigonis Wall Putty in 350-400 ml of water in a clean bucket and not vice-versa.
    ► Mix continuously by hand or using an electric stirrer to make a homogeneous lump-free paste.
    ► Leave the mix to slake for 10 minutes.
    ► Remix the paste for about 2 minutes before use.
    ► Use the mixture within 30 minutes of preparation.

  5. Application areas

    Tigonis Wall Putty is ideal for finishing and decorating exterior and interior walls of all kinds. It can be used before repainting old surfaces. It is ideally applied on plastered walls in order to create a smooth, less absorbent surface before the top coat is applied.

    TECHNICAL SPECIFICATION
    Color: Super White
    Mixing Ratio With 35-40% water by weight
    Dry film thickness 1-1.5 mm (Standard)
    Coverage * 10-12 sqft Per KG per coat / Finish coat 6- 6.5 sq. ft. per  Kg
    Pack Size 5KG, 40 KG & 50 kg
    Tensile adhesion Strength  1.0 Mpa at 28 days
    Compressive adhesion Strength 16 Mpa at 28 days
    Pot life after mixing Water 2-3 hours
  6. Documents