TIGONIS Tigoguard 2K Plus Acrylic Waterproofing Coating
It is a 2-component cement-based waterproofing material, which is a combination of powder (fine sand, sizing), liquid (modified acrylic polymer) and nontoxic substances, environmentally friendly - free Volatile Organic Compound (VOC), with excellent waterproofing property - no leakage up to 10 m
Tigonis Tigoguard 2K plus is a high-strength Acrylic Waterproofing, polymer-modified elastomeric, protective coating. This is composed of best-quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. When the acrylic-modified emulsion is applied according to direction, the cured coating becomes a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surfaces.
Tigonis Tigoguard 2K plus is a high-strength Acrylic Waterproofing, polymer-modified elastomeric, protective coating. This is composed of best-quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. When the acrylic-modified emulsion is applied according to direction, the cured coating becomes a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surfaces.
It is a 2-component cement-based waterproofing material, which is a combination of powder (fine sand, sizing), liquid (modified acrylic polymer), and nontoxic substances, environmentally friendly – free Volatile Organic Compound (VOC), with excellent waterproofing property – no leakage up to 10 m
| Mixing Ratio 1.4 : 1 ( Powder : Liquid ) |
| Appearance Part A- White Liquid |
| Part B- Grey Powder |
| pH of the mix 10-12 |
| Pot Life of the Mix 90 Min |
| Elongation at break at DFT of 1 mm 150-160% |
| Water permeability No leakage after 24 hrs |
| Polymer/Cement Ratio 50-65% based on wet weight |
- TIGOGUARD 2K PLUS is not suitable for traffic area application.
- TIGOGUARD 2K PLUS is a premeasure package, do not dilute with water or add more sand or cement.
- TIGOGUARD 2K PLUS material should have topcoat coating over it. Do not leave it bare to the sun at all times.
- Do not leave first coat dry longer than 8 hours.
- Non Flammable.
- Avoid contact with skin and eyes. Any splashes to the skin or eyes should be washed off with clean water.
- Wear mask when mixing.
- Wear protective gloves and eye protection when applied.
TIGONIS Tigoguard 2K Acrylic Waterproofing Coating
Tigonis Tigoguard 2K Acrylic Waterproofing Coating is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating .This is composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder.
TIGONIS 1K Acrylic Waterproofing Coating ( TIGOCRETE )
Tigonis 1K Acrylic Waterproofing Coating is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating. It is applied to waterproof and protect concrete and masonry substrates.
MEGAPROOF++(INTEGRAL WATERPROOFING COMPOUND)
MEGAPROOF WPC (WATERPROOFING COMPOUND) is specially formulated using active plasticising agents, additives and polymers. It is a corrosion resistant additive used for cement concrete, mortar & plasters.
TIGONIS Acrylic Distemper
Tigonis is one of the leading Acrylic Distemper manufacturers and suppliers in West Bengal, Odissa, Bihar, and Jharkhand.