Substrate: | Tigonis Tile Adhesive Platinum complies with the adhesion requirements of IS 15477: 2019 Type 3 – Grey Color |
Application Areas: | Interior Floor, Interior Walls ( Upto any height ) Tile on Tile applications on floor and wall, Exterior floor and wall, Ceiling |
Tile Size: | Interior and exterior Floor application — Up to any size
Interior Wall application — Up to 5ft by 2.5ft |
Type of Tile: | Ceramic , Vitrified tiles , Clay tiles , Stone , Mosaic , Large Tiles for interior & exterior applications , Tiles with porosity less than 3% for all applications |
Bed Thickness: | Upto 12mm |
Pack Size: | 20 kg,30 kg |
Substrate: | Cementitious , plastered walls , Concrete , Cement – lime mortars , Screed |
- Home
- Tile | Stone | Block Fixing Solutions
- Tigonis Tile Adhesive – Platinum
Tigonis Tile Adhesive – Platinum
Tigonis Tile Adhesives provide a range of dry mix mortar tile and stone fixing solutions over a variety of substrates in different conditions , available in a total of 5 variants ; all complying with global EN and BIS standards for tile and stone fixing.
- General Details
Tigonis Tile Adhesives provide a range of dry mix mortar tile and stone fixing solutions over a variety of substrates in different conditions , available in a total of 5 variants ; all complying with global EN and BIS standards for tile and stone fixing.
- TECHNICAL SPECIFICATION
- DESCRIPTIONSURFACE PREPARATION
► Clean the surface of dust, dirt, grease, deposits etc.
► If applying on old tiles, sand/ chisel and roughen the surface for better bonding.ADVANTAGES► High bonding tensile and shear strength
► Thermal insulation
► Readymade product, saves time and labour.
► Better bonding, superior durability
► Enhanced water proofing capability
► Lesser surface area material consumption due to inherent properties - MIXING
► Mix with water in the ratio 3:1 to form a homogenous easy-to-use mixture.
► Hand mixing is possible for smaller quantities upto 4-5 Kgs.
► For larger quantities, a mechanical mixer is recommended. - APPLICATION
► Spread the mixture to a thickness of 3-6 mm and comb with trowel. Once spread, mount the tiles within 30 minutes.
► Once mounted and/or patterned tap the tiles gently and firmly to ensure complete coverage in order to avoid air voids, pockets, gaps and seepage crevices.
► Allow tiles to settle for 24 hours before filling joints. - Documents