Tile-Grout
Tigonis Tile Grout is an economical hard-wearing, water-resistant chemical for filling joints in exterior and interior walls and floor ceramic tiles and mosaics.
- General Details
Tigonis Tile Grout is an economical hard-wearing, water-resistant chemical for filling joints in exterior and interior walls and floor ceramic tiles and mosaics. It is a specially formulated chemical to fill joints of up to 5 mm in width. It is easily applied by hand and because of its unique composition, does not shrink when dry.
- ADVANTAGES
► Easy application
► Does not curl up during application
► Good adhesion
► Environment-friendly
► Good water and weather resistance
► Helps to reduce shrinkage & cracks in tiles. - MIXING & APPLICATION
► Thoroughly mix TIGONIS TILE GROUT in 1 – 1.2 ratio with water.
► Allow to stand for 5 minutes and mix again.
► Wait until the mixture has set (approx. 24 hours) before grouting.
► Apply TIGONIS TILE GROUT diagonally into the joints with spatula and remove extra grout
► Only mix enough material that can be used within 1 hour of mixing
► Porous tiles should be moistened with water before grouting.
► After application, polish the tiles with a clean, dry cloth leaving the joints flush with tile
► Moisten the joints with a wet sponge 24 hours after grouting. - TECHNICAL SPECIFICATION
Mixing Ratio 20-25% water by weight Pot Life 90 mins Pack Size 1 Kg Compressive Strength > 15 Mpa Shades White, Ivory, Pure Yellow, Water Green, Sky Blue, Sapphire, Slate Grey, Silver Grey, Ivy, Burgundy, Saltillo, Terracotta, Spectra Pink. - Documents