TIGONIS EPOXY GROUT
TIGONIS EPOXY GROUT is a stainless, chemical resistant, hard wearing & waterproof epoxy based tile joint filler which has high degree of resistance to abrasion, impact & shocks. It is meant for grouting gap between glazed, ceramic, porcelain, vitrified & fully vitrified tiles, natural stones & Glass mosaics. This can also be used as a high-performance epoxy adhesive for fixing tiles & stone.
► Stain Free
► Excellent chemical resistant
► Develops hygienic, hard wearing and abrasion-resistant surface.
► Waterproof property
► Peel, crack or powdering resistant
► Highly resistant to heavy traffic.
► Color Fast
► Easy to Use – No noxious odor, nonflammable, water cleanable, easy to clean.
- Shake the bottle of Hardener and stir the Base prior to mixing pot
- Pour Part A (Base) & Part B (Hardener) into a clean mixing pail.
- Mix thoroughly with a slow speed mixer until liquids are completely blended.
- Add Part C Filler Powder and mix for a uniform color & consistency.
- Avoid air bubble formation.
- Use the mix within 45 – 60 minutes from mixing.
| Properties | Test Results |
| Component Apperance | Resin (Part A) – White Viscous liquid Hardener (Part B) – Yellow Viscous liquid Filler (Part C) – Colored powder |
| Mixing ratio | 184 (Resin) + 78 (Hardener) + 738 (Filler) (2 : 1 : 7) |
| Mixed Materials Consistancy | Smooth creamy paste |
| Mixed Density | 1.75 ± 0.05 kg/ litre |
| Pot Life @ 300c | Min. 60 minutes |
| Available Shades | As per Shade card |
| PERFORMANCE PROPERTIES | |
| Compressive Strength after 7 days | > 50 Mpa |
| Flexural Strength after 7 days | > 30 Mpa |
| Shear Adhesive Strength after 14 days | >= 30 Mpa |
| Water Absorption | <=0.5 grm |
| Pull-off Adhesive Strength | >=1.5Mpa (Concrete Failure) |
- Using a press the grout firmly into the joints.
- Hold the float at a 90° angle and pull it at a 45° angle diagonally across the joints and tile to avoid pulling out the material.
- Ensure that joint is filled completely, and grout is not just sitting on top.
Block Joining Mortar
Tigonis block joining mortar is a high strength adhesive for quick and firm laying of AAC Blocks, fly ash bricks, concrete blocks, etc with thin joints.
TIGONIS Tile Bonder
Tigonis Tile Bonder is an economical on-site mix additive for improving the strength and workability of cement, for fixing of tiles. Tigonis Tile Bonder exhibits very high water retention and thus reduces the absorption of water in to porous substrates.
TIGONIS Grout Admixture
Tigonis Grout Admixture is a white synthetic polymer additive, use with cement based grouts for tile joint grouting works.
Tigonis Tile Adhesive – Super
Standards: Tigonis Tile Adhesive Super complies with the adhesion requirements of IS 15477:2019 Type 1