Extra White Cement Primer

TIGONIS EXTRA WHITE CEMENT PRIMER is an acrylic based water-thinnable wall coating suitable for application on exteriors as an undercoat to exterior emulsions on exterior masonary surfaces.

SKU: EWCP Category: Paints

General Details
TIGONIS EXTRA WHITE CEMENT PRIMER is an acrylic based water-thinnable wall coating suitable for application on exteriors as an undercoat to exterior emulsions on exterior masonary surfaces. It acts as a sealer coat to prevent the excess absorption of decorative paints and enhances the overall coverage of the finish coats.
SURFACE PREPARATION
Ensure surface is dry and free from old paint, dirt, grease, loose particles, algae & fungi. Rub the surface with 180 grade Emery/Sand paper and wipe clean. Dilute Primer with approximately 15-20% clean water to get application consistency. Stir the mixture well to avoid lumps. Now apply the first coat and allow it to dry for minimum 4-5 hours. Now apply the second coat and rub the surface with 320 grade Emery/Sand paper.
ADVANTAGES
► Does not chalk
► Can be applied on adequately cured fresh plaster
► Does not require curing with water
► Provides excellent adhesion to top coat emulsions
► Prevents peeling off/flaking of top coat emulsions
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application. Do not over-thin or over-extend the brush. Do not use stainers or any other colourants. Stir well and strain before use.

TECHNICAL SPECIFICATION

Documents

Download Brochure

Colour:	White
Drying Time	Within 30 Mins
Recoat Time	After 4-5 Hours
Over Coating Interval	8 Hours
Coverage	10-12 sq meters per liter per coat
Stability	To be used within 24 hours
Pack Sizes	1 Lt. 4 Lt. 10 Lt. & 10 Lt.
Area of Application	Exterior Plastered Surface & Concrete